Register
Recruit Create CV

Instrumentation And Control Engineer Jobs in Edmonton, Alberta

Senior Control & Instrumentation Engineer - Food Or Beverages / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Edmonton, Alberta, Canada
• Should have Knowledge in specifying process plant instruments and hands on experience
• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,
• Knowledge in PLC and SCADA systems for industrial networks.
• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control
• Knowledge on Machine Safety – CAT 3 wiring.
• Knowledge on control panel design as per UL508A.
Senior Control & Instrumentation Engineer - Food Or Beverages / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Calgary, Alberta, Canada
 Knowledge on NEC standards.
 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics
 Previous work experience in system commissioning and validation would be a plus.
 Trained and qualified in NFPA70E requirements.
 Should have knowledge on Cable Sizing
 Should have knowledge on UL508A and power panel design.
Senior Control & Instrumentation Engineer - Food Or Beverages / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Alberta, Canada
 Knowledge on NEC standards.
 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics
 Previous work experience in system commissioning and validation would be a plus.
 Trained and qualified in NFPA70E requirements.
 Should have knowledge on Cable Sizing
 Should have knowledge on UL508A and power panel design.
(Global Oil Gas) Control Systems And Instrumentation Engineer - Honeywell
By MatchaTalent At Calgary, Alberta, Canada
Have a minimum of 10 years of related experience in control systems and instrumentation.
Recent experience with Gas Turbines Compressor Control is an added advantage.
Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).
Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.
Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.
Privilege to have knowledge of control system security and control system networks.
Instrumentation And Control Engineer
By EPI&C Systems Inc. At Calgary, Alberta, Canada
Take responsibility for the Instrumentation and Controls tasks and deliverable to meet quality, cost, and schedule requirements.
Instrumentation Diploma or higher 4 - 10 years Instrumentation experience in the oil and gas industry
Experience to work on multiple projects at the same time.
Experience with various control systems (PLC and DCS) and HMI systems
Familiarity and experience with IEC61508 and IEC61511
Safety engineering certification would be an asset (Exida or TUV)
3. Control & Instrumentation Engineer - Food Or Beverages / Fmcg –
By Kushi Civil Structural consultancy Pvt Ltd At Calgary, Alberta, Canada
• Should have Knowledge in specifying process plant instruments and hands on experience
• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,
• Knowledge in PLC and SCADA systems for industrial networks.
• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control
• Knowledge on Machine Safety – CAT 3 wiring.
• Knowledge on control panel design as per UL508A.
Control & Instrumentation Engineer - Food Or Beverages / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Calgary, Alberta, Canada
• Should have Knowledge in specifying process plant instruments and hands on experience
• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,
• Knowledge in PLC and SCADA systems for industrial networks.
• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control
• Knowledge on Machine Safety – CAT 3 wiring.
• Knowledge on control panel design as per UL508A.
Instrumentation And Control Engineer
By NES Fircroft At Warburg, Alberta, Canada
3. Evaluate and manage PCOs from the Construction Contractor.
4. Coordinate with Design Engineer on potential design changes and manage engineering change notices with Construction Contractor.
5. Evaluate and manage Non-Conformance Reports (NCR).
10. Experience with ABB Infi-90 hardware and Symphony Plus Engineering/Operations preferred.
11. Experience troubleshooting graphics, logic, instrumentation, equipment issues as it relates to the control system.
12. Experience reading electrical wiring diagrams and schematics preferred.
Sr Operations Engineer - Instrumentation/Control Systems
By MatchaTalent At Calgary, Alberta, Canada
Serve as an advisor to management on technical questions and issues.
EDUCATION: B.S. in Engineering. MS or higher qualification is desirable.
EXPERIENCE: Fifteen (15) years of relevant operations engineering experience.
Provide high-level engineering expertise in the resolution of plant operational problems. May provide work direction to lower classified engineers.
Formulate and implement long-term strategies to improve operations and reduce costs. Defines the long-term technical direction of the assigned operating area.
Lead groups of engineers in the commissioning/start-up phase of complex projects and the mothballing/demothballing of existing plants.
Control Systems And Instrumentation Engineer
By MatchaTalent At Calgary, Alberta, Canada
Have a minimum of 10 years of related experience in control systems and instrumentation.
Recent experience with Gas Turbines Compressor Control is an added advantage.
Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).
Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.
Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.
Knowledge of industrial communication and wireless technology is advantageous.
Senior Control & Instrumentation Engineer - Food Or Beverages / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Ontario, Canada
 Knowledge on NEC standards.
 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics
 Previous work experience in system commissioning and validation would be a plus.
 Trained and qualified in NFPA70E requirements.
 Should have knowledge on Cable Sizing
 Should have knowledge on UL508A and power panel design.
Instrumentation And Control Technician
By Centerra Gold Inc. At Mackenzie, British Columbia, Canada
Receive a highly competitive salary based on skills and experience, plus benefits
attractive salary based on skills and experience
Basic knowledge of Microsoft Office products, especially Word, Excel, and Outlook
Knowledge of Delta V, ABB 800XA and Allen Bradley PLC systems
Your Responsibilities Will Include, But Are Not Limited To
3+ years of experience working as an Instrumentation & Control Technician
Junior / Intermediate Instrumentation And Control (I&C Engineer
By AWC Solutions At Langley, British Columbia, Canada
Minimum 4 years of relevant experience in I&C engineering and design
Experience with a variety of DCSs and PLCs, preferably with Allen Bradley
Experience in sizing, selecting and material requisition development for instrumentation
Excellent communication (verbal & written), interpersonal, and customer service skills
Strong planning and organizational skills, including attention to detail
Strong problem-solving and decision-making skills
Junior / Intermediate Instrumental And Control (I&C) Engineer
By AWC Solutions At City of Langley, British Columbia, Canada
Minimum 4 years of relevant experience in I&C engineering and design
Experience with a variety of DCSs and PLCs, preferably with Allen Bradley
Experience in sizing, selecting and material requisition development for instrumentation
Excellent communication (verbal & written), interpersonal, and customer service skills
Strong planning and organizational skills, including attention to detail
Strong problem-solving and decision-making skills
Control And Instrumentation Engineer – Oil & Gas / Fmcg
By Kushi Civil Structural consultancy Pvt Ltd At Manitoba, Canada
• Should have Knowledge in specifying process plant instruments and hands on experience
• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,
• Knowledge in PLC and SCADA systems for industrial networks.
• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control
• Knowledge on Machine Safety – CAT 3 wiring.
• Knowledge on control panel design as per UL508A.
Generation, Protection And Control Engineer 2
By Powertech Labs Inc. At Surrey, British Columbia, Canada
Project management skills with the ability to organize and lead projects of a multidisciplinary nature.
Quality Management, Assurance and Control skills are desirable.
Remote work will be considered if the above qualifications are met.
Knowledge and/or experience on energy facility or other power system device dynamic model development
At least 4 years of working experience in protection and control, power system analysis, or related post graduate research.
Field working experience on energy facility commissioning and control design
Instrumentation & Control Engineer Jobs
By Teck Resources Limited At Trail, British Columbia, Canada
Provide guidance as the Instrumentation & Control Subject Matter Expert for capital projects and in management of site-wide standards
Experience with regulatory process control and knowledge of advanced process control
Minimum of 5 years of relevant industrial Instrumentation & Control experience
Experience developing new instrumentation applications in an industrial setting, coordinating with instrumentation trades
Experience with instrumentation & control safety and reliability
Experience reading, updating, and developing instrumentation & control documentation
Control & Instrumentation Engineer- Fmcg/ Food Or Beverages
By Kushi Civil Structural consultancy Pvt Ltd At Quebec, Canada
Should have Knowledge in specifying process plant instruments and hands on experience in selection of instrumentation.
Instrumentation knowledge and experience – set-up, calibration verification, adjustments, etc.
Knowledge in PLC and SCADA systems for industrial networks.
Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control Centers for process plants in compliance with NEC.
Knowledge on Machine Safety – CAT 3 wiring.
Knowledge on control panel design as per UL508A.
Industrial Instrumentation And Process Control Technician (Mechanic)
By West Fraser At Quesnel, British Columbia, Canada
The ability to interact effectively with all levels of personnel, both hourly and management.
A valid Instrumentation certification and/or Interprovincial Red Seal certification
Experience in either a pulp mill or heavy industrial setting is preferred
Knowledge of computer software and applications, with a preference given to a candidate with Maximo, MS Excel, AutoCAD and Word.
Excellent interpersonal, communication, and team-building skills
The successful candidate will have proven experience in many of the following:
Sr. Instrumentation & Control Engineer - Mississauga
By Hatch At Mississauga, Ontario, Canada
Collaboration with project management/engineering staff to achieve project objectives;
Full knowledge, understanding and application of Electrical Codes, Standards and Regulations;
Technical strength coupled with interpersonal skills;
Strong PC skills and polished, professional written and verbal communication.
Ensuring compliance with all relevant engineering standards and internal procedures for all engineering activates;
Supervision of a project and project team from concept to completion;
Instrumentation & Control Design Engineer
By KPIT At Mississauga, Ontario, Canada
Product Verification & Validation Management.
Previous experience with Safety Instrumented Systems, & Safety Related Systems instrument selection.
Previous experience with HAZOP & LOPA.
Experience with the following standards UL508, UL508A, NFPA79, NFPA 70, CSA.
Experience with electrical design international standards IEC and IEEE.
Experience with projects for Hazard Location specially in North America.
Instrumentation And Control Engineer
By Nuclear Fuel Services At Peterborough, Ontario, Canada
Creative problem-solving skills, outstanding analytical abilities, developing leadership skills and the ability to work in a team.
Project management and controls training; at minimum exposure working within these controls.
Ensure that design is done for manufacturability and complies with requirements.
Exposure with a range of interdisciplinary activities; systems design, requirements development, interface design and testing.
Experience working with and writing design documentation, including but not limited to:
Excellent written and oral communication skills, understandable by a diverse audience.
Instrumentation And Control Engineer
By Spruce InfoTech, Inc At Montreal, Quebec, Canada
Ability to liaise with and work directly with customers, including experience with requirements gathering and on-site commissioning;
Write technical documentation, including requirements specifications, design specifications, functional analysis and test protocols;
Bachelor's degree in electrical engineering or automated production, or experience deemed equivalent;
A minimum of 10 years of experience in instrumentation and control;
Excellent written and oral communication skills;
Evaluate customer requests and provide engineering for multidisciplinary projects;
Instrumentation And Control Engineer
By The JNE Group of Companies At Hamilton, Ontario, Canada
Desire and ability to learn new software, applications, knowledge, and skills
Develop specifications and standards based on legislation, industry standards and plant requirements
Control Systems (PLC, DCS, SCADA, HMI, PAC) with preferred knowledge of Rockwell or Siemens Automation systems
5+ years relevant working experience
Advanced knowledge of applications related to:
Deliver projects within budget in a safe and timely manner
Electrician And Instrumentation Superintendent
By Construction & Expertise PG inc. At Schefferville, Quebec, Canada
Experience in supervision and management;
Sense of organization and leadership;
Team player and problem solver.
Rotation : 3 weeks on - 3 weeks off;
Day shift or Night shift.
Transportation to and from work included;
Instrumentation And Controls Engineer
By Protech Solutions At Greater Quebec City Metropolitan Area, Canada
Possess notions of project management;
Meet with customers to define instrumentation and control needs and installation requirements;
The candidate must have more than 10 years of experience in instrumentation and controls;
Experience acquired in the Mining & Metals, petrochemical and aluminum industry is an asset;
Know the AutoCAD drawing software and have a good knowledge of general computing with the Office suite;
Knowledge of Plant3D drawing software, REVIT, an asset;
Protection And Control Engineer
By Hydro One At Toronto, Ontario, Canada
Assist manager in the planning of department work programs, identifying resource needs and development of budget.
Good knowledge of the practical design and operation of large transmission systems with large numbers of connected generators.
Comprehensive knowledge of theory and application practice of protection to large transmission systems and constituent assets.
Comprehensive knowledge of control and monitoring systems in Hydro One.
Excellent writing and oral communication skills.
Demonstrated strong organization and planning skills.
Metrology And Instrumentation Engineer
By Michelin At Magog, Quebec, Canada
You have experience in the field of research and development as well as standardized tests (ASTM, SAE, etc.), an important asset;
A competitive salary and benefits
Collaborate with colleagues all over the world
A stimulating role in a highly innovative company
Varied activities and opportunities to get involved
Implement the test center calibration validation strategy;

Are you looking for an exciting opportunity to use your engineering skills to develop and maintain instrumentation and control systems? We are looking for an experienced Instrumentation and Control Engineer to join our team and help us create innovative solutions for our clients. You will be responsible for designing, developing, and maintaining instrumentation and control systems for a variety of applications. You will also be responsible for troubleshooting and resolving any issues that arise. If you are an experienced engineer with a passion for problem-solving and a drive to create innovative solutions, then this is the job for you!

Overview:

Instrumentation and Control Engineers are responsible for designing, developing, and maintaining the systems and equipment used to measure and control the performance of industrial processes. They work with a variety of instruments, such as sensors, transmitters, and controllers, to ensure that the systems are operating correctly and efficiently. They also develop and implement strategies to improve the performance of the systems and equipment. Instrumentation and Control Engineers must have a strong understanding of engineering principles and be able to troubleshoot and solve complex problems.