Advanced Quality Engineer Jobs
By ABC Technologies At Greater Toronto Area, Canada
Hands on experience in manufacturing, knowledge on how to build quality parts, and understands Quality Systems.
Minimum 3 years of experience in launch engineering, manufacturing, and/or quality.
Hands on experience with all tools of IATF16949 especially APQP, PPAP, root cause analysis.
Working knowledge of SPC, GD&T, and Gage R&R.
Perform Launch Readiness audits, identify open issues and get them closed to ensure successful launch.
Support plants to obtain on time PPAP.
Advanced Test Engineer Jobs
By Honeywell At Kanata, Ontario, Canada
Interpret Product Qualification Requirements based on regulatory standards and system specifications.
Minimum 4 years’ experience writing qualification/hardware verification test plans, test procedures, and test reports
Experience developing Hardware Certification test plans, executing test procedures, generating formal reports, including failure/issue resolution.
Provide/Approve estimates for Hardware Qualification activities
Hands-on experience with Computer Networking (TCP/IP/CISCO), BER Testers, Routers, Switches, LabVIEW, TestStand
Excellent verbal and written communication skills
Engineer, Advanced Manufacturing Jobs
By Adient At Foam Lake, Saskatchewan, Canada
Qualifications (Education, Skills, And Experiences)
To report near miss/unsafe action / safety suggestion to line management.
Applies statistical methods to estimate future manufacturing requirements and potential
Knowledge of takt time, line balancing method
Knowledge on value stream mapping and Roll throughput yield
Plan, direct and coordinate all manufacturing processes in industrial plant
Advanced Support Engineer - Diamond
By Check Point Software Technologies Ltd At Toronto, Ontario, Canada
Ensures management of customer expectations and resolution of technical issues in a timely manner.
Develop and maintain troubleshooting skills on all Check Point products and technical knowledge in industry standard based technologies
5-8 years of relevant TCP/IP networking and Internet Security technology experience.
Experience with Check Point products.
Strong Linux/Unix and Windows Server system-level knowledge.
Experience configuring and troubleshooting VPN technologies.
Advanced Metering Infrastructure (Ami) Engineer
By ATCO At Edmonton, Alberta, Canada
Review Meter Data Management, Load Settlement and other control reports identifying published data discrepancies. Coordinate resolution of any data issues.
Manage AMI meter deployment plans, communicate with field resources and streamline the asset chain.
Initiate and oversee pilot projects that evaluate the performance and benefits of AMI deployment across various locations and situations.
Manage system maintenance and implementation of system enhancements, upgrades, and replacements.
Manage the maintenance and implementation of HES and endpoint firmware upgrades for hardware and software in coordination with system provider.
Communicate and provide information, documents and reports to internal and external customers and satisfy auditor’s requirements.
Advanced Software Engineer Jobs
By Honeywell At Kanata, Ontario, Canada
7+ Experience in coding using C#, C++
Experience understanding Fortran Architecture and code
Working knowledge on Databases (Preferably Sybase)
Experience working with messaging technologies (preferably ActiveMQ)
Conduct regular system and software checks to identify and resolve any issues or bugs and ensure security protocols are being followed.
Collaborate with cross-functional teams to troubleshoot and resolve issues, including development, IT, and security teams.
Advanced Manufacturing Engineer Jobs
By ABC Technologies At Greater Toronto Area, Canada
Hands on experience in manufacturing, knowledge on how to build quality parts, and understands Quality Systems.
Minimum 3 years of experience in launch engineering, manufacturing, and/or quality.
Hands on experience with all tools of IATF16949 especially APQP, PFMEA, PPAP, etc.
Working knowledge of KAIZEN, SPC, GD&T, and Gage R&R.
Ensure plant performs enough internal burst builds to prepare for passing customer Run at Rate as quoted or better.
Perform Launch Readiness audits, identify open issues and get them closed to ensure successful launch.
Sr. Advanced Manufacturing Engineer
By Honeywell At Slemon Park, Prince Edward Island, Canada
Expert knowledge and technical skills in manufacturing processes
Minimum 5 years of experience in Aerospace or Manufacturing related fields
Extensive relevant experience in manufacturing engineering
Master’s Degree or advanced professional certification
Lean Expert and Blackbelt certifications
Lead technical support for disassembly, inspection, repair, assembly, and testing of aircraft products
Senior R&D Engineer (Advanced Development)
By Boston Scientific At Mississauga, Ontario, Canada
Experience gathering and consolidating requirements from cross-functional groups
Assist in understanding unmet clinical needs, identifying solution requirements and developing business cases
6+ years of experience in medical devices
Experience with leading rapid prototyping efforts and making design recommendations
Strong communication skills (verbal and written)
Strong problem analysis and hypothesis-driven experimental design skills
Manufacturing Engineer, Sub-Contracted Manufacturing - Advanced Medical Devices
By Zimmer Biomet At Montreal, Quebec, Canada
Ensuring the supplier applies the proper and effective risk management method for production (pFMEA).
Serving as the point of contact between the suppliers, project manager, sourcing representative, Quality team and the design and development team.
Good working experience with suppliers providing goods and/or services.
Excellent oral and written communication skills in both French and English.
Strong sense of ownership and organization skills with the capability of managing multiple tasks and projects concurrently.
You are an organized person with the ability to effectively manage multiple tasks in parallel.
Global Trade Director, Advanced Manufacturing And Digital Technologies Sectors (Indo-Pacific Region)
By Export Development Canada | Exportation et développement Canada At Ottawa, Ontario, Canada
Advanced knowledge of best practices in sales and/or account management
Undergraduate Degree in Business Administration, Finance, Engineering or equivalent professional designation in relevant discipline
Minimum 8 years of combined business development and technical advisory experience in the relevant sector/area of responsibility
Strong technical knowledge of supply chains acquired through direct business activity within the advanced technology and manufacturing sector
Experience supporting global business development teams in the Indo-Pacific region
Well-developed and deep global professional network and strong technical and business knowledge acquired through directly relevant business activity
Advanced Application Engineer Jobs
By Honeywell At Sherwood Park, Alberta, Canada
Some experience in software, engineering or related field.
Model based development system design
Bachelor’s degree in Mechanical Engineering
Fully understand the product lifecycle and seek means to reduce cost of the product and processes.
Demonstrated ability to design and develop new technologies and applications for products.
Diverse and global teaming and collaboration.
Advanced Test Manufacturing Engineer
By Zebra Technologies At Dorval, Quebec, Canada
Demonstrate Project Management, Continuous Improvement Methods (Six Sigma), Lean Principles for test equipment qualification.
Requires a significant high level of proven effectiveness with initiative, self-direction, self-motivated, and cross-functional teaming, and leadership experience is preferred.
Establishes requirements for highly complex test design projects and may lead a team responsible for establishing requirements.
Defines requirements for and may design complex new tools to aid in the analysis and solving of complex problems.
Bilingual Requirement Must be fluent in French Canadian and English
8+ years of experience in Electrical, Manufacturing, Computer Science Engineering or related field
Sr Advanced Electrical Engineer
By Honeywell At Mississauga, Ontario, Canada
Program management knowledge including earned value reporting, and experience with computer-based scheduling and reporting tools is an asset
Establish and maintain detailed technical plans, estimates and schedules; provide status to project engineering and management.
Thorough knowledge of requirement capture, electrical design, analysis, simulation, build, verification and support processes
Experience performing product integration of controller and design verification; strong problem solving skills
Overall technical coordination within the engineering functions supporting hardware development to ensure that all customer requirements are addressed.
Ability to prioritize and manage multiple projects/activities with limited and shared resources.
Advanced Test Engineer Jobs
By ExcelGens, Inc. At Dorval, Quebec, Canada
• Knowledge of manufacturing processes and integration with test
• Experience with transferring manufacturing and test processes to contract manufacture
• Possess good skills with office suite.
• Knowledge of programming languages (C++, C#, LabVIEW, TestStand, Python)
• Strong teamwork and people skills.
• Understand existing test methodologies.
Advanced Manufacturing Engineer Jobs
By Legrand, North America At Scarborough, Ontario, Canada
Experience using Product Lifecycle Management “PLM” systems such as Arena.
Experience using Material Resource Planning “MRP” systems such as JD Edwards, ePic or similar.
Knowledge of DFM, DFMA, DFMEA and PFMEA activities and processes.
Electrical Safety, Industrial and Manufacturing Engineering Skills sets.
Experience working with UL for both new project submittal and follow up services a plus.
Develop, document, implement, and maintain manufacturing processes required to successfully manufacture new or existing products.
Advanced Manufacturing Engineer Jobs
By InVision Staffing Services Inc. At Toronto, Ontario, Canada
Budget: Provides input to departmental budgets. Manages projects to the established budget.
• Optional: Programming skills with LabView, Python, C#, MATLAB or similar are a plus.
• Knowledge of DFM, DFMA, DFMEA and PFMEA activities and processes.
• Electrical Safety, Industrial and Manufacturing Engineering Skills sets.
• Experience working with UL for both new project submittal and follow up services a plus.
Develop, document, implement, and maintain manufacturing processes required to successfully manufacture new or existing products.

Are you looking for an exciting opportunity to use your engineering skills to help shape the future of advanced manufacturing? We are looking for an Advanced Manufacturing Engineer I to join our team and help us develop cutting-edge manufacturing processes and technologies. You will be responsible for designing, developing, and testing new manufacturing processes and equipment, as well as troubleshooting existing processes and equipment. If you are a creative problem solver with a passion for engineering, this could be the perfect job for you!

Overview Advanced Manufacturing Engineer I is a professional who is responsible for developing and implementing advanced manufacturing processes and systems. They are responsible for designing, testing, and troubleshooting manufacturing processes and systems to ensure that they are efficient and cost-effective. They also work with other engineers, technicians, and production personnel to ensure that the processes and systems are meeting the needs of the organization. Detailed Job Description Advanced Manufacturing Engineer I is responsible for designing, developing, and implementing advanced manufacturing processes and systems. They must analyze existing processes and systems to identify areas of improvement and develop solutions to increase efficiency and reduce costs. They must also develop and test new processes and systems to ensure that they are effective and efficient. Additionally, they must work with other engineers, technicians, and production personnel to ensure that the processes and systems are meeting the needs of the organization. Job Skills Required
• Knowledge of advanced manufacturing processes and systems
• Knowledge of engineering principles and practices
• Knowledge of computer-aided design (CAD) software
• Ability to troubleshoot and solve complex problems
• Ability to work independently and as part of a team
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work under pressure and meet deadlines
Job Qualifications
• Bachelor’s degree in engineering or a related field
• At least two years of experience in advanced manufacturing engineering
• Knowledge of advanced manufacturing processes and systems
• Knowledge of engineering principles and practices
• Knowledge of computer-aided design (CAD) software
Job Knowledge
• Knowledge of advanced manufacturing processes and systems
• Knowledge of engineering principles and practices
• Knowledge of computer-aided design (CAD) software
• Knowledge of quality assurance and control processes
• Knowledge of safety regulations and standards
Job Experience
• At least two years of experience in advanced manufacturing engineering
• Experience in designing, developing, and implementing advanced manufacturing processes and systems
• Experience in troubleshooting and solving complex problems
• Experience in working with other engineers, technicians, and production personnel
Job Responsibilities
• Design, develop, and implement advanced manufacturing processes and systems
• Analyze existing processes and systems to identify areas of improvement
• Develop and test new processes and systems to ensure that they are effective and efficient
• Work with other engineers, technicians, and production personnel to ensure that the processes and systems are meeting the needs of the organization