Instrumentation And Control Technologist Jobs in Warburg, Alberta

3. Evaluate and manage PCOs from the Construction Contractor.

4. Coordinate with Design Engineer on potential design changes and manage engineering change notices with Construction Contractor.

5. Evaluate and manage Non-Conformance Reports (NCR).

10. Experience with ABB Infi-90 hardware and Symphony Plus Engineering/Operations preferred.

11. Experience troubleshooting graphics, logic, instrumentation, equipment issues as it relates to the control system.

12. Experience reading electrical wiring diagrams and schematics preferred.

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

Have a minimum of 10 years of related experience in control systems and instrumentation.

Recent experience with Gas Turbines Compressor Control is an added advantage.

Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).

Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.

Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.

Privilege to have knowledge of control system security and control system networks.

Take responsibility for the Instrumentation and Controls tasks and deliverable to meet quality, cost, and schedule requirements.

Instrumentation Diploma or higher 4 - 10 years Instrumentation experience in the oil and gas industry

Experience to work on multiple projects at the same time.

Experience with various control systems (PLC and DCS) and HMI systems

Familiarity and experience with IEC61508 and IEC61511

Safety engineering certification would be an asset (Exida or TUV)

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

Serve as an advisor to management on technical questions and issues.

EDUCATION: B.S. in Engineering. MS or higher qualification is desirable.

EXPERIENCE: Fifteen (15) years of relevant operations engineering experience.

Provide high-level engineering expertise in the resolution of plant operational problems. May provide work direction to lower classified engineers.

Formulate and implement long-term strategies to improve operations and reduce costs. Defines the long-term technical direction of the assigned operating area.

Lead groups of engineers in the commissioning/start-up phase of complex projects and the mothballing/demothballing of existing plants.

Have a minimum of 10 years of related experience in control systems and instrumentation.

Recent experience with Gas Turbines Compressor Control is an added advantage.

Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).

Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.

Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.

Knowledge of industrial communication and wireless technology is advantageous.

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

Receive a highly competitive salary based on skills and experience, plus benefits

attractive salary based on skills and experience

Basic knowledge of Microsoft Office products, especially Word, Excel, and Outlook

Knowledge of Delta V, ABB 800XA and Allen Bradley PLC systems

Your Responsibilities Will Include, But Are Not Limited To

3+ years of experience working as an Instrumentation & Control Technician

Manage projects onsite throughout the duration and effectively interface and own the relationship with customers and their vendors.

Experience desired with the following:

Experience with IEDs: SEL 2032, SEL 421, 311A, 311B, 311C, 311L, 734, Bitronics, ION 7350, Qualitrol TTL 1000

Experience with test sets and software: Doble 6150, ASE 2000 Test Kit, Arbiter, Protest, RTS, Megger MPRT & EZ CT 2000

Experience with relays: SEL, GE, MICOM, AREVA, ALSTOM: Line Differential, generator protection, transformer protection

Perform function testing of substation control circuits on relay panel, transformers & circuit breaker change outs.

Minimum 4 years of relevant experience in I&C engineering and design

Experience with a variety of DCSs and PLCs, preferably with Allen Bradley

Experience in sizing, selecting and material requisition development for instrumentation

Excellent communication (verbal & written), interpersonal, and customer service skills

Strong planning and organizational skills, including attention to detail

Strong problem-solving and decision-making skills

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

Self-starter with minimal supervision requirement; Experience working independently; Experience prioritizing, organizing work, and meeting deadlines

Completing standard service reports, invoicing packages, and other administrative requirements timely

Excellent oral and written communication skills

Solid interpersonal and leadership skills

Electronics and/or mechanical trouble shooting skills. “Hands-on approach”

Knowledge of rotating machinery operation and controls systems

Industrial experience in troubleshooting, designing and programming electronic, pneumatic, hydraulic and electrical control systems will be considered an asset.

Experience in the area of PLC programming, troubleshooting and repair.

Knowledge of CNC equipment and related controls.

Strong organizational and interpersonal communication skills.

Attractive (FLEX) benefits package (fully Company paid)

Diagnose, service, calibrate and repair all production, non-production and test equipment and perform preventive and predictive maintenance.

Provide guidance as the Instrumentation & Control Subject Matter Expert for capital projects and in management of site-wide standards

Experience with regulatory process control and knowledge of advanced process control

Minimum of 5 years of relevant industrial Instrumentation & Control experience

Experience developing new instrumentation applications in an industrial setting, coordinating with instrumentation trades

Experience with instrumentation & control safety and reliability

Experience reading, updating, and developing instrumentation & control documentation

Should have Knowledge in specifying process plant instruments and hands on experience in selection of instrumentation.

Instrumentation knowledge and experience – set-up, calibration verification, adjustments, etc.

Knowledge in PLC and SCADA systems for industrial networks.

Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control Centers for process plants in compliance with NEC.

Knowledge on Machine Safety – CAT 3 wiring.

Knowledge on control panel design as per UL508A.

Manage projects onsite throughout the duration and effectively interface and own the relationship with customers and their vendors.

Experience desired with the following:

Experience with IEDs: SEL 2032, SEL 421, 311A, 311B, 311C, 311L, 734, Bitronics, ION 7350, Qualitrol TTL 1000

Experience with test sets and software: Doble 6150, ASE 2000 Test Kit, Arbiter, Protest, RTS, Megger MPRT & EZ CT 2000

Experience with relays: SEL, GE, MICOM, AREVA, ALSTOM: Line Differential, generator protection, transformer protection

Perform function testing of substation control circuits on relay panel, transformers & circuit breaker change outs.

The ability to interact effectively with all levels of personnel, both hourly and management.

A valid Instrumentation certification and/or Interprovincial Red Seal certification

Experience in either a pulp mill or heavy industrial setting is preferred

Knowledge of computer software and applications, with a preference given to a candidate with Maximo, MS Excel, AutoCAD and Word.

Excellent interpersonal, communication, and team-building skills

The successful candidate will have proven experience in many of the following:

Collaboration with project management/engineering staff to achieve project objectives;

Full knowledge, understanding and application of Electrical Codes, Standards and Regulations;

Technical strength coupled with interpersonal skills;

Strong PC skills and polished, professional written and verbal communication.

Ensuring compliance with all relevant engineering standards and internal procedures for all engineering activates;

Supervision of a project and project team from concept to completion;

Product Verification & Validation Management.

Previous experience with Safety Instrumented Systems, & Safety Related Systems instrument selection.

Previous experience with HAZOP & LOPA.

Experience with the following standards UL508, UL508A, NFPA79, NFPA 70, CSA.

Experience with electrical design international standards IEC and IEEE.

Experience with projects for Hazard Location specially in North America.

Demonstrated strong analytical abilities and organizational skills

Identifies user requirements/problems and recommends possible solutions

Maintains a current knowledge of new developments in technology, safety, quality, and regulations by attending conferences, seminars, and reviewing technical papers

Completion of recognized post secondary technologist diploma program in an appropriate electronics engineering technology, or equivalent education.

Certified or eligible for certification, at the technologist level, by the Applied Sciences Technologists and Technicians of British Columbia.

Two (2) years directly related relevant experience.

Creative problem-solving skills, outstanding analytical abilities, developing leadership skills and the ability to work in a team.

Project management and controls training; at minimum exposure working within these controls.

Ensure that design is done for manufacturability and complies with requirements.

Exposure with a range of interdisciplinary activities; systems design, requirements development, interface design and testing.

Experience working with and writing design documentation, including but not limited to:

Excellent written and oral communication skills, understandable by a diverse audience.

Ability to liaise with and work directly with customers, including experience with requirements gathering and on-site commissioning;

Write technical documentation, including requirements specifications, design specifications, functional analysis and test protocols;

Bachelor's degree in electrical engineering or automated production, or experience deemed equivalent;

A minimum of 10 years of experience in instrumentation and control;

Excellent written and oral communication skills;

Evaluate customer requests and provide engineering for multidisciplinary projects;

Desire and ability to learn new software, applications, knowledge, and skills

Develop specifications and standards based on legislation, industry standards and plant requirements

Control Systems (PLC, DCS, SCADA, HMI, PAC) with preferred knowledge of Rockwell or Siemens Automation systems

5+ years relevant working experience

Advanced knowledge of applications related to:

Deliver projects within budget in a safe and timely manner

Experience in reading engineering drawings

Experience in troubleshooting equipment issues with electrical and instrumentation

Experience using a computer for record keeping and documentation

Ability to communicate effectively and constructively, as well as good verbal and written English skills.

Strong interpersonal and organizational skills

Outstanding benefits package including medical, dental, pension, life insurance, disability, accident insurance, vacation, and holidays

Experience in supervision and management;

Sense of organization and leadership;

Team player and problem solver.

Rotation : 3 weeks on - 3 weeks off;

Day shift or Night shift.

Transportation to and from work included;