Tech Support Level Ii Jobs

Experience with a Computerized Maintenance Management System (CMMS)

2+ years of experience with automated conveyor systems and controls

2+ years of experience in the repair of material handling equipment

2+ years of experience conducting predictive and preventative maintenance procedures

1+ year of knowledge with electrical and electronic principles

Procedure based maintenance experience (PM)

Lead initiatives as assigned by management

Service Management tools ( ex Service Now

5yrs experience (combination of hands on and phone support)

Strong technical knowledge of PC and Desktop hardware

Working technical knowledge of current operating systems, and standards

Ability to launch and operate desktop diagnostic tools to perform remote diagnostics

3-5 years’ experience in NDT inspection.

Canadian General Standards Board (CGSB) Level II certification/s.

Performs and completes NDT field inspections in compliance with client, industry and company standards and policies.

Prepares and completes all necessary paperwork required in compliance with client, industry and company standards and policies.

Ensures all equipment is setup, calibrated and functional at all times in alignment with client and company procedures.

Applies testing criteria in accordance with applicable specifications for both conventional and advanced NDT methods.

Demonstrates a commitment to enhancing one’s own awareness, knowledge, and skills related to equity, diversity, and inclusion.

Advises lab managers on back-up systems, data security, and assists with disaster-recovery plans in labs.

Assists users, both remotely and in-person, to diagnose and resolve problems, escalates when necessary, and documents problem status and action taken.

Maintains appropriate professional designations and up-to-date knowledge of current information technology techniques and tools.

Problem determination, escalation, and resolution of requests made to the department helpdesk.

Performs analysis, diagnosis, and resolution of complex desktop problems for users, recommends and implements corrective solutions as needed.

3-5 years’ experience in NDT inspection.

Canadian General Standards Board (CGSB) Level II certification/s.

Performs and completes NDT field inspections in compliance with client, industry and company standards and policies.

Prepares and completes all necessary paperwork required in compliance with client, industry and company standards and policies.

Ensures all equipment is setup, calibrated and functional at all times in alignment with client and company procedures.

Applies testing criteria in accordance with applicable specifications for both conventional and advanced NDT methods.

Provide feedback and recommendations to senior management regarding customer needs and system improvements.

Participate in special projects and perform other duties as assigned by the Senior IT Manager.

Strong communication skills (oral and written) in French and in English.

Knowledge of network operating systems, including Windows Server.

Experience in configuring and troubleshooting hardware, software applications, printers, etc.

Minimum 2 years of experience in technical support or related role.

Experienced Level II Dental Assistant (Harp & NDAEB Certified)

Must have minimum of 3+ year of experience

To be determined depending on experience and performance

Assisting dentist during dental procedures that features handing instruments and other materials

Assisting dentist with crowns, bridges, porcelain veneers, dental implants, invisalign, teeth whitening, fillings, extractions and mouth guards

Placement and removal of rubber dams

Familiarity with Microsoft Office, especially excel and various project management approaches.

3+ years of consulting experience.

Excellent communication, accounting and organization skills.

Microsoft Project or Primavera P6 experience

Experience collecting field data for environmental disciplines such as wildlife, terrestrial ecology, soils, wetland and aquatic biology, or hydrology.

Assistant Project Manager, Environmental Assessment

3-5 years’ experience in NDT inspection.

Canadian General Standards Board (CGSB) Level II certification/s.

Performs and completes NDT field inspections in compliance with client, industry and company standards and policies.

Prepares and completes all necessary paperwork required in compliance with client, industry and company standards and policies.

Ensures all equipment is setup, calibrated and functional at all times in alignment with client and company procedures.

Applies testing criteria in accordance with applicable specifications for both conventional and advanced NDT methods.

TBD depending on experience and performance & Benefits & Free Education

Experienced Dental Assistant Level II (NDAEB certified)

Must have a minimum of 2-3 years of experience

Experience with Tracker dental software an asset

Assisting Dentists/Specialists (mainly Periodontists/Prosthodontists and Endodontist and Oral surgeons) during dental procedures that features handing instruments and other materials

Placement and removal of rubber dams

Bachelors or master’s degree in science, environmental resource management, environmental law, environmental engineering or equivalent experience

Strong interpersonal, management and leadership skills

Supervisory, project management and client management experience an asset

Project management, including the development and maintenance of project scopes, schedules and budgets, and coordination of junior staff

Client management, including communication through verbal and written correspondence which may include presentation

Preparing, reviewing and managing federal/provincial/municipal environmental assessments, permits, licenses and approvals

Purchase material and track inventory of all safety and janitorial supplies with working knowledge of EAM

Bachelor's degreewith 2+ years in food industry or anAssociate'sdegree with 5+ years of experience in food industry

Critical thinking /problem solving. Thorough knowledge of CAPA process

Good communication skills with peers and productionpersonal

Computer skills including Word, Excel, Outlook and Microsoft AX

Excellent oral and written communication skills.

3-5 years’ experience in NDT inspection.

Canadian General Standards Board (CGSB) Level II certification/s.

Performs and completes NDT field inspections in compliance with client, industry and company standards and policies.

Prepares and completes all necessary paperwork required in compliance with client, industry and company standards and policies.

Ensures all equipment is setup, calibrated and functional at all times in alignment with client and company procedures.

Applies testing criteria in accordance with applicable specifications for both conventional and advanced NDT methods.

Career development to grow and evolve as a dental professional on your individual career path, including access to industry-leading continuing education

Clinical chairside assisting duties including knowledge of instrumentation

Thorough understanding of practice health and safety requirements

Previous dental assisting experience is preferred

Knowledge of AbelDent PMS is preferred

Employee and Family Assistance Program (EFAP) that connects team members and their families with complimentary, confidential, short-term counseling and advisory services

Lead initiatives as assigned by management

2+ yrs experience hardware & deskside software support

Strong technical knowledge of PC and Desktop hardware

Working technical knowledge of current operating systems, and standards

Ability to launch and operate desktop diagnostic tools to perform remote diagnostics

Analytical and problem-solving abilities, with keen attention to detail

Thorough knowledge of radiation safety and operational field requirements regarding radiation safety.

Strong technical knowledge and understanding of NDT techniques, services and procedures.

Excellent report writing and review skills.

Strong verbal and written communication skills matched with the ability to negotiate and build relationships with key stakeholders.

Strong organizational skills with demonstrated ability to prioritize, solve problems, and consistently meet deadlines.

A sense of urgency, good attention to detail, excellent organizational and analytical skills, pragmatic, eager to learn.

A good working knowledge of the fundamental requirements of process engineering, and the basic requirements of other engineering fields.

Engineering experience in the same or similar industry, and developing leadership skills.

Education – Qualifications, Accreditation, Training

Effective technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to Worley and its customers.

A good working knowledge of applicable local and international standards and statutory and regulatory specifications.

Deliver process engineering services that meet Worley, its customers and applicable statutory and regulatory specifications, on time and within budget.