Quality Control Level 1 Inspector Jobs in Brampton Road, City of London, Ontario

·Excellent time management and prioritization skills.

·Ensure compliance with stated requirements and regulations.

·Meet Health Canada requirements for QPIC/RPIC

·Previous QPIC/RPIC experience an asset

·1-3 years’ experience in QA in a pharmaceutical environment

·Advanced Knowledge of GMP as it relates to the storage, distribution of pharmaceutical products.

Communicate results and provide feedback on inspections to management.

Import data to tabulate results and highlight deviances to standards and process capabilities in Excel.

Basic understanding of Coordinate Measuring methods, and knowledge of hand use measuring equipment.

Use of Microsoft Office, with basic working knowledge of Excel.

Working knowledge of measurement instruments, i.e. calipers, micrometers.

Use of CMM or Vision system inspection experience is desired.

Use technical skills and knowledge to identify cause of problem.

Proficient at the various inspection and testing requirements.

Minimum three years experience in Automotive Manufacturing environment or related experience.

Previous experience working with metallurgical laboratory equipment.

Knowledge of Microsoft Office software (Word, Excel).

What Linamar Has To Offer

Use technical skills and knowledge to identify cause of problems.

Ability to think outside the box to make continuous improvement recommendations to quality management.

Operate CMM and have basic CMM programming skills.

High School Diploma or equivalent general education.

Minimum five years of previous related experience.

Knowledge and understanding of CMM programming and TS-16949.

Knowledge of and experience with CSA Z/N299, ASME Section I, II, V, IX, and/or ISO 9001 is an asset

Examines work pieces to determine conformance with specifications and welding requirements

Coordinates inspection activities for fabrication to various Codes/Standards with QC Lead and Project Manager

Ensures compliance with procedural requirements (i.e. ASME Section I, II, CWB W59 and W47, CSA Z299/N299, ISO 9001)

Participates in certification audits and various renewals

Additional project-specific responsibilities, as required

· Understanding how to interpret drawings, specifications and inspection requirements (GD&T).

· Ability to interpret Engineering Drawings/Specifications/Standards and approach/apply/explain knowledge clearly, concisely and logically.

· Review and verify inspection and testing of products to ensure products meet drawing and specification requirements.

· Reports to Quality Manager to work with appropriate functional areas to resolve discrepancies.

· Experience and/or training are included in considerations.

· Works under minimum supervision and guidance performing part inspection.

CWB Level 1 welding inspector certification or prior welding experience

Two to five years of related welding experience (minimum GMAW flat ticket.)

What Linamar Has To Offer

A college diploma in industrial engineering technology, manufacturing technology, or a related discipline, Welding inspection, level 1 or 2 is recommended.

Ensure all assigned duties are completed on schedule

Inspect welds for Quality/ Defects

Exposure to machining practices, experience with Metrology, SPC, knowledge of measuring techniques, gauging and inspection equipment.

Use technical skills and knowledge to identify cause of problem.

Make continuous improvement recommendations to quality management.

Proficient at the various inspection and testing requirements.

Operate the CMM and basic knowledge of programming.

Measure or weigh products to assess conformity to quality standards. Basic math skills required.

Use technical skills and knowledge to identify cause of problem.

Inspecting incoming material per receiving inspection requirements.

May measure or weigh products to assess conformity to quality standards requiring basic math skills.

High School Diploma or equivalent general education.

Knowledge of S.P.C. i.e. Histograms, X and R charts, Cpk.

Familiar with TS-16949 requirements considered an asset.

Quality Inspector Job Qualifications & Skills

Performs various sorting, inspection, production, and data entry

Quality Inspector Job Responsibilities & Duties

Reads and follows work instructions, work rules and directions

Maintains organization and cleanliness of work area

Uses inspection, measuring and test equipment as required

Preference given to those with 2+ years’ experience within an electronics Manufacturing Inspection role.

High school diploma or equivalent qualification.

Read drawings, plans, and specifications to understand the requirements of products and services.

Excellent knowledge of MS Office.

Good math and technical skills.

Shifts: Monday to Friday | 8:00AM – 4:00PM

Performs various sorting, inspection, production, and data entry

Reads and follows work instructions, work rules and directions

Maintains organization and cleanliness of work area

Uses inspection, measuring and test equipment as required

Follows all employee policies and other duties as assigned

Ability to work required hours

Special Requirements: Must be willing to undergo medical examination prior to onboarding.

Monitoring and overseeing quality inspection activities at site as directed by client.

Expected End Date: December 1, 2023

Rotational schedule - 2 weeks on / 2 weeks off

Scope of work: Inspection activities, technical reporting, and monitoring.

Knowledge of and experience with CSA Z/N299, ASME Section I, II, V, IX, and/or ISO 9001 is an asset

Examines work pieces to determine conformance with specifications and welding requirements

Coordinates inspection activities for fabrication to various Codes/Standards with QC Lead and Project Manager

Ensures compliance with procedural requirements (i.e. ASME Section I, II, CWB W59 and W47, CSA Z299/N299, ISO 9001)

Participates in certification audits and various renewals

Additional project-specific responsibilities, as required

Education required: High School Diploma or Heavy Equipment Mechanic/Truck and Transport Block will be considered as an asset.

Experience in welding and repair of forestery equipment considered an asset.

Opportunity to become a Red Seal Mechanic

Garage and new equipment (new construction 2019-2020)

Work near your living area

Perform heavy equipment maintenance activities, including installation, repair, troubleshooting, diagnostics and preventive maintenance.

2+ years’ experience in a manufacturing/warehousing environment

BRC is seeking a passionate candidate possessing the following experience and competencies:

Performing routine quality assessments on manufactured materials and outgoing products

Measure product dimensions, examine the functionality of products, and compare the final products to ensure standards are met.

Documenting inspection findings and completing detailed reports and performance records

Educating the production team on quality control processes, including acceptance/rejection criteria, quality concerns, or any possible health and safety concerns

Implementing corrective actions, when required, after consultation with the Project management, Engineering and/or QC Manager

Communicating effectively with both staff and management

Minimum two-year Engineering Technology diploma, or equivalent experience in a Quality Control position would be considered an asset

Willingness to pursue PCI certification

Ability to assume responsibility, interface and communicate effectively with others and demonstrate strong interpersonal skills

Ensuring finished concrete products meet the quality standards set by the Company or PCI or CPCI

Inspection experience in a shipbuilding setting considered an asset

Strong working knowledge of MS Office suite, SharePoint

Strong communication skills, both verbal and written

Experience with industrial piping installations, including weld inspection and hydro testing

Minimum high school diploma, community college diploma or university bachelor's degree would be considered an asset

Ability to deal with conflict in a professional manner

Strong time management skills and ability to handle a multitude of concurrent tasks

CWB Level 2 certification with 5+ years of experience

60 hours per week. Most shifts start at 7:00 am but hours may vary based on site requirements

Experience with weld mapping and as-built drawings

Competitive base salary, negotiable, based on experience

Good computer skills, especially in the use of MS Office and Google Docs

Implementing corrective actions, when required, after consultation with the Project management, Engineering and/or QC Manager

Communicating effectively with both staff and management

Minimum two-year Engineering Technology diploma, or equivalent experience in a Quality Control position would be considered an asset

Willingness to pursue PCI certification

Ability to assume responsibility, interface and communicate effectively with others and demonstrate strong interpersonal skills

Ensuring finished concrete products meet the quality standards set by the Company or PCI or CPCI

·Follow all Safety Rules and Regulatory Requirements

·Previous experience working in a manufacturing facility or Quality department would be an asset.

We are looking for a Quality Inspector to join our team.

·Complete required testing on all plated products

·Complete Reports from data collected from the X-ray testing devices.

·Complete Nonconformance Reports and issues.

Inspect/monitor aircraft records for compliance with CARs and MCM requirements.

Follow-up to ensure correctable items are in process and tracked to completion within company policies, regulatory requirements, and acceptable timelines.

5 years’ experience performing or supervising maintenance activities in the aviation industry.

Strong communication skills (interpersonal, listening, verbal and written).

Knowledge of Q-Pulse and/or similar computer tracking systems will be considered an asset.

Results focused, able to manage a large volume of administrative tasks involving highly detailed technical information.

Perform other job-related tasks as assigned by management

3-5 years minimum experience in laying out and fabrication steel

Welding Certification in D1.1 and/or D1.5 is preferred

401k with employer match and 100% vesting from the beginning

Perform documented daily inspections of fabricated steel in an AISC certified facility fabricating Structural Steel (D1.1/D1.5)

Inspect fabricated material to ensure conformance with the shop drawings

Quality Inspector Job Qualifications & Skills

Performs various sorting, inspection, production, and data entry

Quality Inspector Job Responsibilities & Duties

Reads and follows work instructions, work rules and directions

Maintains organization and cleanliness of work area

Uses inspection, measuring and test equipment as required

Implementing corrective actions, when required, after consultation with the Project management, Engineering and/or QC Manager

Communicating effectively with both staff and management

Engineering Technology diploma, or equivalent experience would be considered an asset

Willingness to pursue PCI certification

Ability to assume responsibility, interface and communicate effectively with others and demonstrate strong interpersonal skills

Ensuring finished concrete products meet the quality standards set by the Company or PCI or CPCI

Perform production testing and inspection to ensure work conforms to customer requirements, standards and specifications;

Understand specific project requirements and ensure that work is performed in accordance with specifications, regulations, standards and internal procedures;

Performs inspections in the presence of the customer to ensure compliance of the final product with standards, requirements and contractual agreements;

Demonstrate relevant work experience in quality control (construction or heavy manufacturing)

Must have a thorough knowledge of quality control procedures, record keeping and systems

Knowledge of calibration of measuring instruments

Proven time management skills and a strong attention to detail.

Follow all requirements according to the Canada Grain Act and Canada Grain regulations.

1 – 3 years of experience in a laboratory or Agricultural setting is an asset

Proven ability to manage and coordinate multiple projects in a fast-paced, highly professional environment.

Candidates must demonstrate excellent verbal and written communication skills including grammar and composition.

Log-in, organizing, storing, distribution, and disposing of incoming samples and after final inspections

(5+ years) Experience in blueprint reading and comparing parts and assemblies to customer requirements

A comprehensive benefits package with coverage that includes Life Insurance, Short Term Disability, Long-term Disability, Vision, & Dental

Knowledge of quality control and quality assurance terminology, methods, and tools

Demonstrated knowledge of testing best practices hand tools to be effective in validating machined components

Ability to read and understand drawing requirements; clear understanding of material identification; identify, define, and describe non-conformances/defects.

(5+ years) Experience in manufacturing of tight tolerance parts; ability to work in a manufacturing environment

General experience and knowledge in earthworks, geotechnical, formwork and concrete, super-structural steel, architectural, and/or infrastructure would be considered an asset.

Ensuring Code and client specification requirements are implemented and completed on site.

Competent knowledge of NDE processes as well as ASME B31.3and CSA Codes

Effective written and verbal communication skills

Related experience in Industrial Mechanical Construction and Quality Control

Strong analytical, critical thinking, problem-solving skills, and a high degree of accuracy and attention to detail

Monitors currency of welder qualification records and certifications

Diploma in Quality or Engineering or C.E.T or trade certification/related experience

An attractive health and dental benefits package including an Employee Assistance Program

Examines work pieces to determine conformance with specifications and welding requirements

Ensures compliance with code standards and requirements (i.e. ASME B31.1 and B31.3, B51, CSA)

Intimate knowledge of various Q.A./Q.C. code

Must possess effective communication and interpersonal skills and be a dedicated team player.

There are shift work and overtime requirements.

Perform quality control analysis of raw materials and final products.

Perform routine monitoring of controlled systems and facilities.

Perform specific administrative duties such as maintaining accurate records of observations, results and data evaluations.

Follow ongoing production processes for conformance to operating procedures, product specification, GMP regulations and ISO standards.