Instrumentation And Control Designer Jobs

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

 Knowledge on NEC standards.

 Previous experience with MCC’s, VFD’s, electrical troubleshooting, electrical schematics

 Previous work experience in system commissioning and validation would be a plus.

 Trained and qualified in NFPA70E requirements.

 Should have knowledge on Cable Sizing

 Should have knowledge on UL508A and power panel design.

4 to 9 years relevant electrical CAD experience (previous experience in design drafting or equivalent educational experience using CAD computer systems)

Working knowledge and good understanding of Electrical Code and Standards such OESC, CEC, CSA and IEEE.

Certification in CAD or Drafting would be a strong asset

Experience with AutoCAD version 2014 or higher. Experience with Plant 3D is preferred

Experience with construction site, ability to perform site inspection and work closely with contractor during constructions.

Experience with Microsoft Office is a must

Have a minimum of 10 years of related experience in control systems and instrumentation.

Recent experience with Gas Turbines Compressor Control is an added advantage.

Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).

Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.

Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.

Privilege to have knowledge of control system security and control system networks.

Take responsibility for the Instrumentation and Controls tasks and deliverable to meet quality, cost, and schedule requirements.

Instrumentation Diploma or higher 4 - 10 years Instrumentation experience in the oil and gas industry

Experience to work on multiple projects at the same time.

Experience with various control systems (PLC and DCS) and HMI systems

Familiarity and experience with IEC61508 and IEC61511

Safety engineering certification would be an asset (Exida or TUV)

Minimum 5 years’ experience in the automotive sector

Design using E-Plan according to company’s standard formats; ensuring ease of build and logical control formats for machine control.

Attend, as required, project line up meetings and design review meetings held internally or at the customer’s facility.

Interact with shop floor personnel to answer questions, process ongoing changes or modifications.

Machine start-up and commissioning as required at customer’s facilities either in Canada, the USA or Mexico.

Preparing accurate bills of material.

Receive a highly competitive salary based on skills and experience, plus benefits

attractive salary based on skills and experience

Basic knowledge of Microsoft Office products, especially Word, Excel, and Outlook

Knowledge of Delta V, ABB 800XA and Allen Bradley PLC systems

Your Responsibilities Will Include, But Are Not Limited To

3+ years of experience working as an Instrumentation & Control Technician

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

Minimum 4 years of relevant experience in I&C engineering and design

Experience with a variety of DCSs and PLCs, preferably with Allen Bradley

Experience in sizing, selecting and material requisition development for instrumentation

Excellent communication (verbal & written), interpersonal, and customer service skills

Strong planning and organizational skills, including attention to detail

Strong problem-solving and decision-making skills

3. Evaluate and manage PCOs from the Construction Contractor.

4. Coordinate with Design Engineer on potential design changes and manage engineering change notices with Construction Contractor.

5. Evaluate and manage Non-Conformance Reports (NCR).

10. Experience with ABB Infi-90 hardware and Symphony Plus Engineering/Operations preferred.

11. Experience troubleshooting graphics, logic, instrumentation, equipment issues as it relates to the control system.

12. Experience reading electrical wiring diagrams and schematics preferred.

• Should have Knowledge in specifying process plant instruments and hands on experience

• Instrumentation knowledge and experience – set-up, calibration verification, adjustments,

• Knowledge in PLC and SCADA systems for industrial networks.

• Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control

• Knowledge on Machine Safety – CAT 3 wiring.

• Knowledge on control panel design as per UL508A.

Serve as an advisor to management on technical questions and issues.

EDUCATION: B.S. in Engineering. MS or higher qualification is desirable.

EXPERIENCE: Fifteen (15) years of relevant operations engineering experience.

Provide high-level engineering expertise in the resolution of plant operational problems. May provide work direction to lower classified engineers.

Formulate and implement long-term strategies to improve operations and reduce costs. Defines the long-term technical direction of the assigned operating area.

Lead groups of engineers in the commissioning/start-up phase of complex projects and the mothballing/demothballing of existing plants.

Self-starter with minimal supervision requirement; Experience working independently; Experience prioritizing, organizing work, and meeting deadlines

Completing standard service reports, invoicing packages, and other administrative requirements timely

Excellent oral and written communication skills

Solid interpersonal and leadership skills

Electronics and/or mechanical trouble shooting skills. “Hands-on approach”

Knowledge of rotating machinery operation and controls systems

Have a minimum of 10 years of related experience in control systems and instrumentation.

Recent experience with Gas Turbines Compressor Control is an added advantage.

Good working experience with Honeywell DCS (Distributed Control System) and Honeywell ESD (Emergency Shutdown System).

Experience in plant instrumentation sizing and control design for pressure, temperature, level, flow, etc.

Knowledge of instrumentation and control system design, project handling, studies, troubleshooting, and plant trip investigation.

Knowledge of industrial communication and wireless technology is advantageous.

Provide guidance as the Instrumentation & Control Subject Matter Expert for capital projects and in management of site-wide standards

Experience with regulatory process control and knowledge of advanced process control

Minimum of 5 years of relevant industrial Instrumentation & Control experience

Experience developing new instrumentation applications in an industrial setting, coordinating with instrumentation trades

Experience with instrumentation & control safety and reliability

Experience reading, updating, and developing instrumentation & control documentation

Should have Knowledge in specifying process plant instruments and hands on experience in selection of instrumentation.

Instrumentation knowledge and experience – set-up, calibration verification, adjustments, etc.

Knowledge in PLC and SCADA systems for industrial networks.

Experienced in LV Electrical Distribution Design Power Distribution Panels, Motor Control Centers for process plants in compliance with NEC.

Knowledge on Machine Safety – CAT 3 wiring.

Knowledge on control panel design as per UL508A.

Engineering graduates with 5+ years of relevant experience, please share your resume at [email protected].

Design digital and analog electronic circuits with microcontrollers,

Design electronic circuits that comply with electro-magnetic compatibility (EMC) standards,

Participate in the design of analog and digital printed circuits considering thermal constraints and signal integrity,

Supervise the work of technicians and assemblers when required,

Participate and facilitate design reviews of printed circuits and complete products.