Hardware Assembler Jobs

Salary range: $14.75 to $20.09/hr (based on experience and internal equity)

Ability to make calculations to estimate the quantity of products required

Proficiency in the use of computer systems

Good written and spoken French; English, an asset

Standing work with frequent movement

Loads of 50 to 75 pounds to be lifted

Minimum 2 years of experience in the aircraft field (asset)

Must possess basic computer skills

Medical, dental, accidental death and dismemberment insurance as of your 1st day of work

Short-term disability, long-term disability and life insurance after 30 days

General cost of living allowance provided annually

Ensures that quality and integrity of product is maintained at all times

Build wiring harnesses according to drawing, schematic and work procedure requirements (routing boards).

Perform soldering work according to work procedures and drawing and schematic standards and requirements.

Perform manual or mechanical braiding according to work order requirements.

Read and interpret drawings, schematics and electromechanical assembly diagrams.

Crimp different types of wires and cables of various dimensions using different contacts, lugs and splices.

Install cables, wiring harnesses and sub-assemblies according to markers, cabling diagrams and cabinet drawings.

Excellent organizational and time management skills

Other essential duties and responsibilities may be assigned as required.

Strong interpersonal and leadership skills

Preferred characteristics, competencies and capabilities:

Physical Requirements and Work Conditions:

Assemble parts according to Bill of Material, Bill of Operations, engineering drawings and any other related controlled documents.

Experience in assembly of many complex and diverse products

Prepare the assembly station as per requested on the production order slip

Test and verify that the lock works properly as per specifications

Repair the defective locks by reassembling them or by replacing some of the parts

Identify the defective components and complete the reject report

Report difficulties and malfunctions or deviations on the assembly line

Meeting schedule and production requirements.

Very experienced with hand tools/ power tools for drilling, countersinking, torquing, installing (fasteners, hi-lites).

Very experienced to read blueprints and interpret technical drawings (2D and 3D). Sub-assemblies, sheet metal assembly, mechanical assembly, etc.

Past experience within an aerospace or manufacturing environment.

4 to 6 years experience in Aircraft Assembly is required.

Sheet Metal Fabrication Course, Aerospace Structures Course or Aeronautical Technology Education or similar.

• Program/Project management experience in industry

• HW management tracking enabling teams by ensuring dependencies are met

Must have at least 5+ years of Work experience.

• Outstanding written and oral communication skills

• Experience working in cross functional matrix organization

• Exceptional communication and negotiation skills

Keen ability to strictly follow PC assembling requirements and identify and validate a large number of checkpoints during the assembly process.

Basic mathematical capabilities with an understanding of tolerances/sizes.

Assembly experience in a related industry.

1-3 Years of practical experience as a computer technician.

Strong skills in organization, communication and technical troubleshooting.

Assemble specialized computers and peripherals that includes Small, Tiny and Mini PC computers.

Time management, organization, and adaptability skills.

1+ year of cabinetry experience.

Prior experience in assembling kitchen cabinets is considered an asset.

Knowledge of Workplace Hazardous Materials Information Systems (WHMIS) is considered an asset.

Knowledge of safe lifting and handling techniques.

Effective written and oral communication skills.

Perform a variety of repetitive manual tasks like testing and packaging.

Read and understand schematics and blueprints.

Use hand tools or machines to assemble parts.

Clean and maintain work area and equipment, including tools.

Schedule: Monday – Thursday 7:30 am – 4:30 pm; Friday 7:30 am – 2:00 pm

On a bus route in Aurora

1 to 2 years relevant manufacturing experience

Aptitude to assemble complex equipment, install wiring, strong working knowledge of hand tools.

Mechanical and electrical parts assembly

Read and interpret mechanical drawings, work instructions and specifications.

Follow all applicable safety procedures and practices safe work habits.

Organized with attention to detail.

Opportunity to be cross-trained and enhance mechanical skills

Set up welding equipment to suit the requirements of the task

Knowledge of welding parameters and settings and their influence on the welding process

Knowledge of safe working procedures and practices

Quick career growth based on work ethic

Able to weld using GTAW and GMAW processes on stainless steel and aluminum

Pay range is depending on experience.

Our client located in Mississauga, Ontario is currently seeking a few Mechanical Assemblers.

Read schematics, blueprints and other technical diagrams.

• Operate and tend automated assembling equipment such as robotic and fixed automation equipment.

• Connect cables, tubes and wires to complete assemblies and installations.

• Mark, record and report defects.

Exposure to Mechanical, electrical, electronics, AI and Software management at some point in career

WHAT EDUCATION AND EXPERIENCE IS REQUIRED FOR THIS ROLE?

Document your work in a structured manner, with focus on knowledge sharing.

Experienced with Camera sensors and Lens optics and its respective equations

Hands-on mechanical experience recently in career

Passion for well-engineered products with significant design experience on integrated systems with electrical, and mechanical components

Salary between $20 and $25 per hour depending on experience, with an evening premium of $1.00 per hour

Competitive salary according to experience. Previous years of experience are taken into consideration

Experience in a similar position - an asset

Excellent knowledge in reading plans

Construct sub-assemblies of parts and structures, aircraft components, such as aluminum extrusions, fiberglass laminates and various materials

Prepare and schedule materials required for production

Prior packaging experience is an asset

Remove trusses at the end of the machine

Band and pack trusses on skids

Ensure quality of the product, checking for defects

Able to lift 35 pounds

Must be able to stand 8-10 hours

Concevoir et développer des cartes de circuits imprimés (PCBA) en utilisant des outils de conception assistée par ordinateur (CAD) de pointe

Effectuer des tests de vérification d'ingénierie pour assurer la conformité aux spécifications et aux normes de qualité

Concevoir et réaliser des tests d'onduleurs pour évaluer la performance et la fiabilité des circuits électroniques

Travailler en étroite collaboration avec l'équipe d'ingénierie pour résoudre les problèmes techniques et améliorer les conceptions existantes

Assurer la documentation complète des conceptions et des résultats des tests pour référence future

Participer à des revues de conception et à des discussions techniques pour partager les connaissances et les meilleures pratiques

Participate in training and certification programs to ensure job knowledge and skills set requirements are updated regularly

ESD and soldering training courses and/or work experience (IPC Certification is an asset)

Health & Dental benefits (after 3 months of employment)

1 week shutdown through holiday period + vacation time * 1 week shutdown depending on business requirements

Completing other projects and tasks based on company requirements

Diploma in Engineering Technology, Technical Field or successful experience in a similar role

Basic reading, writing and arithmetic skills.

4% Vacation Pay added to every pay checks

A clean and safe indoor work environment

Training and opportunity for advancement

Efficient and safe use of hand, power and measuring tools

Efficient and safe operation of production equipment and machinery (Training Provided)

Keeps equipment operational by completing preventive maintenance requirements, following manufacturer's instructions, troubleshooting malfunctions, and calling for repairs.

Use basic math skills in order to complete assigned tasks

Two (2) plus years experience in general assembly work

Experience using power, hand tools and tape measures

Who You Are (Basic Qualifications)

Assembles components by examining connections for correct fit, fastening parts and subassemblies.