Register
Recruit Create CV

Design Engineers Jobs

Azure Engineers Jobs
By DCM Infotech Limited At Canada
i.policies inconsistencies found across Client’s subscriptions and management groups.
Azure Engineers to perform the following task, as directed by the client. The Consultant’s responsibilities include:
b. Patching using Azure Update Manager
a. Monitoring and alerting using Azur Monitor
d. Ensuring proper reboot of services
e. Performing backups - many servers are in Azure Site Recovery (ASR)
Research Engineers, Thin Films
By Intlvac At Halton Hills, Ontario, Canada
Minimum Required Education, Skills and Experience
Knowledge of thin film technologies
Experience with optical coatings and deposition systems
Previous experience in the photonics industry
PhD or Master’s Degree in Engineering, Physics or Optics
Intlvac Thin Film is an equal opportunity employer.
Electrical Engineers, Sorel-Tracy Jobs
By Hatch At Sorel-Tracy, Quebec, Canada
Experience within an EPCM, engineering design, 3D modeling, specification writing, project and package management, project and construction management activities
Participation in the compilation of the client Project Safety Management Plan with specific reference to switching, isolation and lockout procedures.
Develop a thorough understanding of the project requirements as they relate to scope, cost and schedule
Define the system requirements to achieve the project results and monitor effectiveness
Minimum 3 years of experience
Knowledge of ETAP, EasyPower or SKM modeling software - Asset
Layer 2 Engineers Jobs
By Rakuten Symphony At Toronto, Ontario, Canada
5-8 years of related experience.
Experience with LTE L2 protocol stack – PDCP, RLC, MAC and LTE access technology.
Experience with LTE TDD and FDD modes of operation.
Excellent verbal and written communication skills, good command of English.
Responsibilities for the position include but are not limited to:
Active and idle mode mobility.
Process Engineers - Merox Specialist
By MatchaTalent At Calgary, Alberta, Canada
Support arrangement and facilitation of technical knowledge exchange workshops with MEROX process technology licensors and Global Manufacturing facilities.
Strong mentorship skills required with the ability to guide the development of junior engineers.
Issue quarterly MEROX process unit performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.
Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.
Perform in-depth plant monitoring and optimize performance of MEROX units by overseeing the unit's operation and economics losses.
Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process.
Deputy Design Engineering Manager - Kiewit Infrastructure Engineers
By Kiewit At Laval, Quebec, Canada
0-5 years of design engineering or design management experience
Strong organization, time management, and attention to detail
Manage deliverables, quality and compliance for the assigned project
Stay up-to-date with the latest design trends and technologies, and apply this knowledge to improve our design process
Design-build experience is an asset but not required
Strong problem-solving and decision-making skills, with a focus on delivering results
Engineers Jobs
By Town of Okotoks At Greater Calgary Metropolitan Area, Canada

We have an opportunity for a Project Engineer and a Development Engineer to join the Community Development & Engineering team. These 2 positions will be key in overseeing a wide range of ...

Process Engineers - Ngl Fractionation
By MatchaTalent At Calgary, Alberta, Canada
Lead unit operations troubleshooting and investigating off-spec products and plant trips/upsets and manage the required deliverables.
Perform in-depth plant monitoring and optimize the performance of assigned units by overseeing unit's operation and economic losses.
Issue detailed reports to recommend changes supported by simulation models' results to optimize unit operation.
Support Operations during turnaround and unplanned Shutdowns/Startups by understanding the unit operating conditions and transient effects to recommend operations improvements.
Perform specific tasks such as catalyst/desiccant forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.
Carry out process simulation using Aspen software package.
Process Engineers - Crude Distillation
By MatchaTalent At Calgary, Alberta, Canada
Perform in-depth plant monitoring and optimize performance of CDU/VDU units while overseeing the unit's operation and economics losses.
Issue detailed reports to recommend changes supported by simulation models' result to optimize unit operation.
Perform specific tasks such as, but not limited to catalyst forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.
Willing to permanently relocate at Dhahran, Saudi Arabia.
Hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.
Exposure to different licensor technologies for Hydrocarbon treating is a plus.
Analyzer Engineers Jobs
By MatchaTalent At Calgary, Alberta, Canada
You should also possess strong leadership skills to manage lead technical dialogues and steer technical teams.
Develop and manage equipment strategies as per the site safety and reliability practices.
Analyze chronic problems and debottleneck complex analyzer problems to improve process operations and economic benefits.
Perform analyzer engineering calculations (e.g., fast loop lag time, probe wake frequency, ventilation requirements, phase envelopes).
You should be experienced in Analyzer communication/transmission protocol and networking considerations for interface to Distributed Control Systems (DCS).
And be able to demonstrate knowledge of industry standards, country-specific regulations, and local codes.
Corrosion Engineers Jobs
By MatchaTalent At Calgary, Alberta, Canada
Implement corrosion management program and on-stream monitoring.
Manage water treatment program and recommend solutions to overcome challenges.
Develop and transfer knowledge about use of coating, CP, corrosion inhibitors, and other corrosion controls and best practices.
Troubleshoot and provide technical support for running HC facilities.
Conduct risk-based inspection based on API-580 methodology.
Review and approve recommended solutions for coating failures and cathodic protection.
Process Engineers - Hydrogen / Hydrotreating
By MatchaTalent At Calgary, Alberta, Canada
Minimum of 15 years of refinery process units experience, with at least 10 years in Hydrogen/Hydrotreating units
Monitor and optimize performance of Hydrogen/Hydrotreating units through in-depth plant monitoring and oversight of unit operation and economics losses.
Provide detailed reports with simulation models to recommend changes for optimizing unit operation.
Lead troubleshooting of unit operations and investigate off-spec products and plant trips/upsets, managing required deliverables.
Support operations during turnaround and unplanned shutdowns/startups by understanding unit operating conditions and recommending improvements.
Perform catalyst forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessments, enhancement studies, and HAZOP studies.
Process Engineers - Aromatic Specialist
By MatchaTalent At Calgary, Alberta, Canada
Facilitate technical knowledge exchange workshops with Aromatics process technology licensors and Global Manufacturing facilities.
Minimum of 15 years experience in refinery or petrochemical process unit, including 10 years' experience in Aromatics plants.
Review and monitor the performance of existing Aromatics facilities using KPIs for optimum operability, profitability, reliability, and process safety.
Issue quarterly Aromatics performance benchmarking reports and provide recommendations for improvement.
Monitor and support facilities in implementing recommendations and closing gaps.
Propose cost optimization or process improvement initiatives with minimal capital investment required through operational adjustment or design modification.
Metering Engineers Jobs
By MatchaTalent At Calgary, Alberta, Canada
Develop and maintain lifecycle management activities for metering and instrumentation systems.
Ensure manufacturing knowledge is captured in the knowledge repository and continuous improvement is delivered by benchmarking and best practices.
Maintain instrumentation and metering system knowledge repository.
You should have a minimum of 12 years' experience in refining/oil and gas plants/petrochemical industries.
You must have strong analytical and troubleshooting skills in the field of metering systems.
You should have a working knowledge of oil/gas-related plant processes.
Process Engineers - Hydrocracker
By MatchaTalent At Calgary, Alberta, Canada
A thorough knowledge of Catalyst Selection and Evaluation is required.
Provide support services and troubleshoot any problems that arise with manufacturing.
Assist in improving the quality of products and reducing production costs.
Inspect and review operating activities and determine production schedules.
Perform optimization analysis, forecasts, economic reviews, and evaluations on equipment/projects, operations, and system operating strategies.
Research ways to reduce production costs, develop production goals, and create schedules and plans for individual tasks.
Process Engineers - Isomerization
By MatchaTalent At Calgary, Alberta, Canada
Arrange and facilitate technical knowledge exchange workshops with licensors and Global Manufacturing facilities
Minimum of 15 years of total refinery or petrochemical process units experience (process engineering and operations) is required.
At least 10 years' experience in handling Isomerization plants is required.
Review and monitor Isomerization manufacturing facilities' performance through KPIs
Issue quarterly performance benchmarking reports with analysis and recommendations
Support facilities in implementing recommendations and closing gaps
3D Mock-Up Engineers Jobs
By CY9 At Toronto, Ontario, Canada

      Please do not target current Alstom employees as this position is supporting our Customer Alstom.   · 3D Mock-up Engineers (Toronto) – 2 positions open. – Requires strong Catia V5 ...

Intermediate & Senior Civil Design Engineers
By MTE Consultants At Kitchener, Ontario, Canada
Communicate with project manager, clients and consultants to ensure design will work within the overall scope of the project.
7-10+ years of experience (preferably in a consulting firm).
Knowledge of engineering principals, applicable government technical standards and legislative regulations.
Excellent attention to detail and sound independent judgment and decision-making skills.
Complete design calculations based on engineering principles, meeting applicable regulatory codes and standards.
Participate in project team meetings and coordinate with team members to ensure efficient project delivery.
Senior Bridge Design Engineer - Kiewit Infrastructure Engineers
By Kiewit At Laval, Quebec, Canada
Ensure that all work is done in accordance with Kiewit and/or project-specific Quality Management plans;
Have the knowledge and ability to analyze and design according to codes, design criteria and structural theories;
Identify and understand the technical requirements of high-risk projects and implement engineering principles to develop solutions;
8 years or more of experience in relevant structural/bridge engineering design;
Excellent theoretical knowledge of structural engineering principles;
Experience with design of multiple bridge types in concrete and steel, wall systems and staged construction analysis;
Software Engineers Jobs
By Uncharted Software At Toronto, Ontario, Canada
Deep experience on the server-side of RESTful web applications - Java, specifically Quarkus or Spring Boot is a plus.
Knowledge of modern orchestration and deployment tools such as Docker or Kubernetes.
Sound, hands-on experience with the REST pattern, MVC, and N-tiered architectures.
Experience building user interfaces - visualization/graphics a plus (d3, canvas, leaflet, etc.).
Excellent verbal and written communication skills.
Front end - JavaScript/TypeScript single-page applications