Electrical Engineers Jobs in Cold Lake, Alberta

Management and coordination of multi-disciplinary projects with a focus on electrical scopes.

2+ years of relevant design experience (new grad to intermediate)

Possess strong organizational, interpersonal and communication skills

Qualifications You Will Need For This Role

Role based in Labrador City - FIFO optional

Travel, living allowance and accommodations/vehicle provided by NSA

Manage project scope, schedule and budget on projects.

Commissioning, testing and troubleshooting remotely and on-site.

Experience with one or more of the following: ClearSCADA, CygNet, OASyS, Factory Talk, SCADAvantage, Factorylink, PcView.

Experience with one or more of the following an asset: SCADAPack’s, Fisher ROC’s, Bristol’s, ABB Totalflow’s.

Experience in all types of communications and networking: MDS, Freewave and others an asset.

Superb written and spoken communication skills.

Develop and maintain lifecycle management activities for metering and instrumentation systems.

Ensure manufacturing knowledge is captured in the knowledge repository and continuous improvement is delivered by benchmarking and best practices.

Maintain instrumentation and metering system knowledge repository.

You should have a minimum of 12 years' experience in refining/oil and gas plants/petrochemical industries.

You must have strong analytical and troubleshooting skills in the field of metering systems.

You should have a working knowledge of oil/gas-related plant processes.

The Electrical Specialist shall have the following responsibilities:

-May act as lead and provide direction to less experienced staff

oTravel and accommodation in remote areas is required.

-Should enjoy working in a challenging environment that test ones skills

-Should have experience operating hand and power tools

-Must have good communication skills both orally and written.

Facilitate technical knowledge exchange workshops with Aromatics process technology licensors and Global Manufacturing facilities.

Minimum of 15 years experience in refinery or petrochemical process unit, including 10 years' experience in Aromatics plants.

Review and monitor the performance of existing Aromatics facilities using KPIs for optimum operability, profitability, reliability, and process safety.

Issue quarterly Aromatics performance benchmarking reports and provide recommendations for improvement.

Monitor and support facilities in implementing recommendations and closing gaps.

Propose cost optimization or process improvement initiatives with minimal capital investment required through operational adjustment or design modification.

Experience in risk management and engineering work package development

Excellent time and project management skills

Provide feedback and assistance on the technical aspects of client projects to management

Knowledge of construction techniques, skills and ability to work with onsite personnel in varying positions

Support the Engineering Manager and Project Manager to meet the project execution philosophy, strategies and execution plans

Competitive base salary, negotiable, based on experience

Electrician trade certification, Electrical Engineering degree or diploma; or a combination of relevant qualifications and work experience

Possess excellent organization, proactive mindset, time management, and communication skills.

5 to 7 years’ experience in either a pulp mill or heavy industrial setting is preferred.

Experience in an operational facility is required.

Strong leadership, planning, budgeting, and problem-solving skills are essential.

Sound knowledge of computer software and applications is preferred.

Support the arrangement and facilitation of technical knowledge exchange workshops with Olefins process technology licensors and Global Manufacturing facilities.

Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.

Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having Olefins process technologies.

Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations.

Provide in-house technical trainings to Global Manufacturing facilities when needed.

Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Olefins unit operating facilities.

Manage long and short-term projects to improve safety, reliability, and profitability

Strong mentorship skills with the ability and drive to guide the development of junior engineers that you will interact with.

Assess operations of Hydrogen Unit existing facilities to optimize operation by developing/setting key performance indicators (KPIs)

Perform in-depth plant monitoring and optimize performance of Hydrogen units

Issue detailed reports to recommend changes supported by simulation models' result to optimize unit operation

Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets

Support arrangement and facilitation of technical knowledge exchange workshops with MEROX process technology licensors and Global Manufacturing facilities.

Strong mentorship skills required with the ability to guide the development of junior engineers.

Issue quarterly MEROX process unit performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.

Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.

Perform in-depth plant monitoring and optimize performance of MEROX units by overseeing the unit's operation and economics losses.

Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process.

Lead unit operations troubleshooting and investigating off-spec products and plant trips/upsets and manage the required deliverables.

Perform in-depth plant monitoring and optimize the performance of assigned units by overseeing unit's operation and economic losses.

Issue detailed reports to recommend changes supported by simulation models' results to optimize unit operation.

Support Operations during turnaround and unplanned Shutdowns/Startups by understanding the unit operating conditions and transient effects to recommend operations improvements.

Perform specific tasks such as catalyst/desiccant forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.

Carry out process simulation using Aspen software package.

Perform in-depth plant monitoring and optimize performance of CDU/VDU units while overseeing the unit's operation and economics losses.

Issue detailed reports to recommend changes supported by simulation models' result to optimize unit operation.

Perform specific tasks such as, but not limited to catalyst forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.

Willing to permanently relocate at Dhahran, Saudi Arabia.

Hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.

Exposure to different licensor technologies for Hydrocarbon treating is a plus.

Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.

Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.

Additional Info: Experience in Honeywell UOP or Axens licensed units.

Perform in-depth plant monitoring and optimize performance of CCR units by overseeing the unit's operation and economics losses.

Issue detailed reports to recommend changes supported by simulation models' result to optimize unit operation.

Willing to permanently relocate at Dhahran, Saudi Arabia.

You should also possess strong leadership skills to manage lead technical dialogues and steer technical teams.

Develop and manage equipment strategies as per the site safety and reliability practices.

Analyze chronic problems and debottleneck complex analyzer problems to improve process operations and economic benefits.

Perform analyzer engineering calculations (e.g., fast loop lag time, probe wake frequency, ventilation requirements, phase envelopes).

You should be experienced in Analyzer communication/transmission protocol and networking considerations for interface to Distributed Control Systems (DCS).

And be able to demonstrate knowledge of industry standards, country-specific regulations, and local codes.

Implement corrosion management program and on-stream monitoring.

Manage water treatment program and recommend solutions to overcome challenges.

Develop and transfer knowledge about use of coating, CP, corrosion inhibitors, and other corrosion controls and best practices.

Troubleshoot and provide technical support for running HC facilities.

Conduct risk-based inspection based on API-580 methodology.

Review and approve recommended solutions for coating failures and cathodic protection.

Minimum of 15 years of refinery process units experience, with at least 10 years in Hydrogen/Hydrotreating units

Monitor and optimize performance of Hydrogen/Hydrotreating units through in-depth plant monitoring and oversight of unit operation and economics losses.

Provide detailed reports with simulation models to recommend changes for optimizing unit operation.

Lead troubleshooting of unit operations and investigate off-spec products and plant trips/upsets, managing required deliverables.

Support operations during turnaround and unplanned shutdowns/startups by understanding unit operating conditions and recommending improvements.

Perform catalyst forecast/evaluation, test runs, de-bottlenecking studies, due-diligence assessments, enhancement studies, and HAZOP studies.

Facilitate technical knowledge exchange workshops with Aromatics process technology licensors and Global Manufacturing facilities.

Minimum of 15 years experience in refinery or petrochemical process unit, including 10 years' experience in Aromatics plants.

Review and monitor the performance of existing Aromatics facilities using KPIs for optimum operability, profitability, reliability, and process safety.

Issue quarterly Aromatics performance benchmarking reports and provide recommendations for improvement.

Monitor and support facilities in implementing recommendations and closing gaps.

Propose cost optimization or process improvement initiatives with minimal capital investment required through operational adjustment or design modification.

Develop and maintain lifecycle management activities for metering and instrumentation systems.

Ensure manufacturing knowledge is captured in the knowledge repository and continuous improvement is delivered by benchmarking and best practices.

Maintain instrumentation and metering system knowledge repository.

You should have a minimum of 12 years' experience in refining/oil and gas plants/petrochemical industries.

You must have strong analytical and troubleshooting skills in the field of metering systems.

You should have a working knowledge of oil/gas-related plant processes.

A thorough knowledge of Catalyst Selection and Evaluation is required.

Provide support services and troubleshoot any problems that arise with manufacturing.

Assist in improving the quality of products and reducing production costs.

Inspect and review operating activities and determine production schedules.

Perform optimization analysis, forecasts, economic reviews, and evaluations on equipment/projects, operations, and system operating strategies.

Research ways to reduce production costs, develop production goals, and create schedules and plans for individual tasks.

Arrange and facilitate technical knowledge exchange workshops with licensors and Global Manufacturing facilities

Minimum of 15 years of total refinery or petrochemical process units experience (process engineering and operations) is required.

At least 10 years' experience in handling Isomerization plants is required.

Review and monitor Isomerization manufacturing facilities' performance through KPIs

Issue quarterly performance benchmarking reports with analysis and recommendations

Support facilities in implementing recommendations and closing gaps